[Esp/Eng] ✨Water Whale Candy Box.✨

portada def.JPG

✨¡Buenas tardes, amigos de holozing!✨Espero que se encuentren bastante bien. Por esta parte, el calor ha estado bastante fuerte, pero estamos bien, gracias a Dios. Como siempre, contenta de pasarme nuevamente por acá a compartirles una bonita idea de dulcero inspirado en Water Whale. Cómo mencioné en un post anterior, estaba corta de materiales, lo cual me obligó a tener que utilizar colores que no tenía en mente, pero al final quedé sorprendida con el resultado, puesto que lo que más resalta es la criatura e hizo un excelente contraste de colores.

Personalmente, me gustó mucho el resultado final y más porque desde hace mucho que no hacía un dulcero reciclando una botella de refresco.

🔸Sin más que añadir, a continuación los dejo con el paso a paso:

✨Good afternoon, holozing friends!✨ I hope you are all doing well. It has been quite hot this time, but we are fine, thank God. As always, I am happy to stop by here again to share a nice idea for a candy dish inspired by Water Whale. As I mentioned in a previous post, I was short on materials, which forced me to use colors that I had not thought of, but in the end I was surprised with the result, since what stands out the most is the creature and it made an excellent contrast of colors.

Personally, I really liked the final result and even more so because it has been a long time since I made a candy dish recycling a soda bottle.

🔸Without more to add, then I leave you with the step by step:


♥️ESPERO QUE TE GUSTE,
¡Empecemos!

♥️I HOPE YOU LIKE IT,
Let's start!


Diseño sin título(1).png

✂️ MATERIALES | ✂️ MATERIALS

Diseño sin título(1).png

  • Botella de refresco.
  • Foami escarchado dorado.
  • Foami escarchado azul.
  • Foami azul.
  • Foami gris.
  • Foami beige.
  • Lazo.
  • Pinturas y marcadores.
  • Pegamento.
  • Hoja blanca.
  • Tijeras.
  • Lápiz.
  • Soda bottle.
  • Gold frosted foam.
  • Blue frosted foam.
  • Blue foam.
  • Gray foam.
  • Beige foam.
  • Ribbon.
  • Paints and markers.
  • Glue.
  • White paper.
  • Scissors.
  • Pencil.

Diseño sin título(1).png

PROCEDIMIENTO | ✨ PROCESS

Diseño sin título(1).png

- ✨ PASO 1:

Lo primero que hice fue cortar la parte de la botella de refresco que quería, en este caso opté por elaborar algo diferente, así que corté la parte de la base, es muy fácil de saber por dónde vamos a cortar porque ya la botella trae una línea por donde nos podemos guiar.

- ✨ STEP 1:

The first thing I did was cut out the part of the soda bottle that I wanted, in this case I decided to make something different, so I cut out the base part, it's very easy to know where we're going to cut because the bottle already has a line to guide us.

Diseño sin título(1).png

IMG_20240918_100053.jpg

IMG_20240918_105229.jpg

Diseño sin título(1).png

- ✨ PASO 2:

Luego, recorté un círculo 1 cm más grande que la pieza de la botella y recorté los bordes ovalados. Además, recorté otro círculo en foami escarchado dorado 1 cm más grande que el círculo anterior y también, recorté una tira en foami escarchado dorado de 0.5 cm para luego pegar en el borde de la pieza de la botella.

- ✨ STEP 2:

Then, I cut out a circle 1 cm larger than the bottle piece and cut out the oval edges. In addition, I cut out another circle in gold frosted foam 1 cm larger than the previous circle and also, I cut out a strip in gold frosted foam 0.5 cm to then glue on the edge of the bottle piece.

Diseño sin título(1).png

IMG_20240918_105342.jpg

IMG_20240918_105348.jpg

IMG_20240918_105357.jpg

Diseño sin título(1).png

- ✨ PASO 3:

Seguidamente, dibujé el patrón de Water Whale en una hoja blanca y transferí a los colores correspondientes de foami, utilizando los siguientes colores: el cuerpo en foami azul claro y la parte superior o panza en foami beige. Al tener todas las piezas listas, comencé a dar color a los bordes con pinturas, di detalles con marcador, pinté la mejilla con rubor y di puntos de luz con pintura blanca. Repetí el mismo proceso de pasar color al borde con pintura y puntos con pintura blanca al círculo con bordes ovalado.

- ✨ STEP 3:

Next, I drew the Water Whale pattern on a white sheet and transferred it to the corresponding colors of foam, using the following colors: the body in light blue foam and the top or belly in beige foam. Once I had all the pieces ready, I began to color the edges with paints, I gave details with a marker, I painted the cheek with blush and I gave highlights with white paint. I repeated the same process of coloring the edge with paint and dots with white paint to the circle with oval edges.

Diseño sin título(1).png

IMG_20240918_105441.jpg

IMG_20240918_105443.jpg

IMG_20240918_111506.jpg

Diseño sin título(1).png

- ✨ PASO 4:

Al estar todo seco, pegué ambos círculos uno encima del otro, dejando el de bordes ovalados encima y en medio recorté una línea vertical y horizontal por donde se meten las golosinas. Luego de esto, pegué en el centro la pieza de la botella. Para que quede más prolijo, pegué en el borde la tira de foami escarchado.

- ✨ STEP 4:

Once everything was dry, I glued both circles on top of each other, leaving the one with oval edges on top and in the middle I cut out a vertical and horizontal line where the candy goes in. After this, I glued the bottle piece in the center. To make it look neater, I glued the strip of frosted foam on the edge.

Diseño sin título(1).png

IMG_20240918_131139.jpg

IMG_20240918_131206.jpg

IMG_20240918_131351.jpg

Diseño sin título(1).png

- ✨ PASO 5:

Para finalizar, pegué un lazo en la parte de la tira de foami escarchado, recorté un rectángulo en foami azul, el cual enrollé y pegué en la parte superior de la pieza de la botella. Uní las piezas de Walle y pegué a la criatura justo en la pieza que enrollé y pegué a la parte superior.

- ✨ STEP 5:

To finish, I glued a bow on the part of the frosted foam strip, I cut out a rectangle in blue foam, which I rolled up and glued on the top of the bottle piece. I joined the Walle pieces and glued the creature right on the piece that I rolled up and glued to the top.

Diseño sin título(1).png

IMG_20240918_131445.jpg

IMG_20240918_131701.jpg

Diseño sin título(1).png

✨Ya pueden introducir las golosinas o chuches que deseen. Así es como pueden elaborar un bonito dulcero para alguna fiesta infantil de los pequeños de la casa. Además de que es una gran idea para reciclar botellas de refresco. Espero que esta idea les sea útil y se animen a elaborarla.

❤️Hasta la próxima publicación.

✨Now you can put in the candy or sweets you want. This is how you can make a nice candy dish for a children's party for the little ones in the house. In addition, it is a great idea to recycle soda bottles. I hope this idea is useful to you and you are encouraged to make it.

❤️Until the next post.


❤️ Hasta la próxima publicación.
❤️ Until the next post.


🐦 Twitter


Gracias por leer mi post Nos vemos pronto.png

thanks for reading my post.png


!TE DESEO UN GRAN DÏA¡
Todas las fotografías son de mi propiedad.
Separador y Fotos editadas en Canva

!I WISH YOU A GOOD DAY
All photographs are my property.
Photos edited in Canva



0
0
0.000

12 comments

Te quedó super lindo mi Valen, cada vez las figuritas en foami te quedan más lindas 😍

0
0
0.000

Ay gracias amiga! Me alegra que así sea, ha sido todo un proceso que queden cada vez mejor 🤭

0
0
0.000

Congratulations, your post has been curated by @dsc-r2cornell. You can use the tag #R2cornell. Also, find us on Discord

Manually curated by Blessed-girl


image.png

Felicitaciones, su publicación ha sido votada por @ dsc-r2cornell. Puedes usar el tag #R2cornell. También, nos puedes encontrar en Discord

0
0
0.000

Muchas gracias por el apoyo amigos ✨

0
0
0.000

Página 2.png

From Venezuela, our witness drives decentralization and the adoption of Web3 technology, creating opportunities for the local community and contributing to the global ecosystem. // Desde Venezuela, nuestro testigo impulsa la descentralización y la adopción de la tecnología Web3, generando oportunidades para la comunidad local y contribuyendo al ecosistema global.


Sigue, contacta y se parte del testigo en: // Follow, contact and be part of the witness in:

Hive
Discord
Twitter
FanBase
Trail
Delegaciones: 10 - 50 - 100 - 500

Vota por el testigo @Hispapro // Vote for the @Hispapro witness

Keychan - Hive.blog - Ecency - Peakd

0
0
0.000

Muchas gracias por el apoyo amigos ✨💕

0
0
0.000

Amiga que tierno te quedó, se ve muy lindo a pesar de que no tuvieras todo lo que necesitabas, el reciclaje le da un toque especial y contribuye con el medio ambiente! 🥰

Además de dulcero también siento que puede ser centro de mesa! Está muy Cuchi! Gracias por compartir 🤗

0
0
0.000

Muchas gracias Ami! Así es pero bueno, ya pude comprar materiales!
Totalmente, puede ser un centro de mesa con otra base quizá. 🤭
Muchas gracias por bella💕

0
0
0.000