❄️Bonitas Bolas Navideñas de Cintas de Foami ❄️// ❄️Beautiful Christmas balls made of foamy Ribbons.❄️

almost 2 years ago

ESPAÑOL

Buenas noches. Espero esten muy bien amigos de Hive. Hoy quiero mostrarles el paso a paso para elaborar unas bolas para el arbolito de navidad. Es muy facil y muy divertido hacerlas.

Estos son los Materilales necesarios para hacerlas.

MATERIALES:

Tiras de foami escarchado.
Tubito del hilo de coser.
Pistola de silicon

Paso a Paso

Paso 1

Se aplica silicon caliente a la cinta y esta se coloca en el tubito.

Luego se hace presion con el dedo.

Paso 2

Luego se coloca otra cinta de foami al lado de la otra cinta de foami.

Paso 3

Se van pegando las cintas una al lado de la otra. Se deben colocar 6 cintas de foami.

Paso 4

Tambien se deben colocar las otras cintas en el otro extremo del tubito.

Paso 5

Luego se van a pegar las cintas de ambos lados en los dos extremos y se van a ir cruzando. debe quedar una cinta blanca al lado de una cinta dorada y asi sucesivamente hasta terminar.

Paso 6

Asi se va creando las pelotas.

Despues se va a tomar un pedazo sde foami y se va a cortar una cinta muy delgada para colocarla como sujetador de la bola.

Asi ha quedado la pelota para el arbolito. Facil y rapido de hacer.

Saludos @hivers!

gracias a todos!

Creditos:

Las fotos fueron tomadas por un tlf ZTE Blade.
Las fotos son de mi autoria
Traductor: https://www.deepl.com/es/translator

ENGLISH

Good evening. I hope you are very well friends of Hive. Today I want to show you the step by step to make some balls for the Christmas tree. It is very easy and a lot of fun to make them.

These are the materials needed to make them.

MATERIALS:

Strips of frosted foami.
Sewing thread tube.
Silicone gun

Step by Step

Step 1

Apply hot glue to the tape and place it in the tube.

Then apply pressure with your finger.

Step 2

Then place another foami tape next to the other foami tape.

Step 3

Glue the ribbons next to each other. Six foami ribbons should be placed.

Step 4

The other ribbons should also be placed at the other end of the tube.

Step 5

Then glue the ribbons on both sides at both ends and cross them. A white ribbon should be next to a gold ribbon and so on until the end.

Step 6

This is how the balls are created.

Then take a piece of foami and cut a very thin ribbon to be used as a ball holder.

This is how the ball for the tree looks like. Easy and quick to make.

Greetings @hivers!

thank you all!

Credits:

The pictures were taken by a ZTE Blade tlf.
The photos are of my authorship
Translator: https://www.deepl.com/es/translator

hive-189641 diy tutorial manualidades handmade neoxian built-it ocd ocdb palnet

0.000

11 comments

@divergente1 70

almost 2 years ago

Te ha quedado muy lindo! y es una muy buena idea para hacer bolas de ese modelo y de varios colores para el arbol de navidad.

0.000

@diyhub 75

almost 2 years ago

Thank you for sharing this post in the DIYHUB Community!

Your content got selected by our fellow curator stevenson7 & you just received a little thank you upvote from us for your great work! Your post will be featured in one of our recurring compilations which are aiming to offer you a stage to widen your audience within the DIY scene of Hive. Stay creative & HIVE ON!

Please vote for our hive witness <3

0.000

@rodriguezkike232 64

almost 2 years ago

Thank you so much!

0.000

@hivebuzz 74

almost 2 years ago

Congratulations @rodriguezkike232! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

	You published more than 10 posts. Your next target is to reach 20 posts.

_{You can view your badges on your board and compare yourself to others in the Ranking}
_{If you no longer want to receive notifications, reply to this comment with the word STOP}

To support your work, I also upvoted your post!

Check out our last posts: